Call Toll Free: 1-800-730-8382
  Product(s) in cart  |  CHECKOUT

Home » Gate Openers - Gate Operators » All Gate Operators » Parking Barrier Gates » Hy-Security Barrier Gates

Manufacturer: Hy-Security
HySecurity StrongArmCrash M50 Anti-Ram Crash Barrier Arm
Discounts Apply !
$15 Off $500 - $1999
$35 Off $2,000 - $4,999
$50 Off $5,000 & up
HySecurity StrongArmCrash M50 Anti-Ram Crash Barrier Arm
  • Description
  • Product Literature
  • Product Videos

Hy-Security StrongArmCrash M50 Anti-Ram Crash Barrier Arm

STRONGARM M50 reliably defends High Security sites world-wide. This high duty cycle crash certified ASTM F2656-07 M50, P2 barrier arm provides incomparable security and safety using proven controls and hydraulics perfected over decades in the most challenging conditions. Unique dual arm design prevents a large truck or a small passenger vehicle from breaching the security perimeter. Bright LED arm lighting and reflective tape on the upper arm, plus a standard traffic light, boost visibility and inhibit accidental impact. The lower arm, at bumper height, reduces possible injury or death from an accidental passenger-car gate-strike. Shields and enclosed controls and hydraulics further safeguard authorized personnel. Integrated, locking hydraulics and highly programmable controls and user relays simplify and reduce the cost of installation and operation. Hy Security backs an unequalled 5-year reliability/quality assurance warranty.

Barrier arm opens/closes in 6 to 8 seconds. Emergency Fast close time is 5 to 7 seconds, depending on arm length. Hot dipped galvanized steel chassis provides optimum corrosion protection. Available finish options include textured, ultra durable "Signal Yellow" (TGIC) polyester powder coat over zinc plate for an enduring, attractive finish.

Easily configure StrongArm M50 operation to specific site requirements with unique and unequalled Smart Touch Controller. PC interface provided for easy configuration and quick troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload latest software, troubleshoot system and save operator configurations. Programmable dual gate or sequenced gate integration. Powerful anti-tailgating configuration. Three user relays with 24 programmable options, plus optional Hy8Relay™ - an extended relay module providing eight additional programmable relay outputs.

Monitor and communicate gate system and accessory malfunction or gate breach alert to service technician or security command and control in real time via Ethernet/fiber, using optional HyNet™ web based accessory. Security or operational alerts can be programmed for subscribers. The last 300 events logged in non-volatile memory can be downloaded from a remote location. Available soon.


  • Crash Certified ASTM F2656-07 M50, P2*
  • Duty Cycle 100 cycles/hr, option for continuous duty
  • Emergency Fast Close Time 5 to 7 seconds depending on arm length
  • Clear Opening 12 to 24 ft in 2 ft increments (3.66 to 7.32 m in .61 m increments). Call for custom arm length.
  • Full Open Angle Adjustable 90º ± 10º
  • IngressProtection IP56
  • Horsepower 2 hp
  • Drive Hydraulic
  • 1 Phase Power 208-230V 50/60Hz *
  • 3 Phase Power 208-230V 50/60Hz or 380-480V 50/60Hz
  • Temperature Rating -40° F to 158° F (-40° C to 70° C) or -10° F to 158° F (-23° C to 70° C) Using biodegradeable fluid
  • Communication RS-232, RS-485; Ethernet/fiber using optional HyNet™ accessory
  • User Controls Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and display or a PC using S.T.A.R.T. software.
  • Relays Three configurable user relays: one 30VDC, 3A solid state and two 250VAC, 10A electromechanical; Adjustable 90º ± 10º
  • Finish Hot dipped galvanized
  • Foundation 6 x 6 x 4 ft (1.83 x 1.83 x 1.22 m) 4,000 psi concrete, #6 rebar, grade 60
  • Warranty 5 year
  • * Tested with 12 ft (3.7 m) arm

HySecurity StrongArmCrash M50 Anti-Ram Crash Barrier Arm Videos

StrongArm M50 Crash Test 2012


Price: Please call for special pricing (800) 730-8382

« Previous | Next »