Estimate shipping
EMX Multi-Voltage Vehicle Loop Detector | EMX-ULT-MVP-U
The ULTRA-MVP multi-voltage vehicle loop detector combines small size with a 12VDC to 240VAC input range. Reduce inventory costs by stocking and transporting just one universal unit.
This detector features DETECT-ON-STOP or (DOS) technology, which allows detection only when a vehicle has come to a complete stop on the loop. This exclusive feature is unique to EMX and is a major advantage if you want to ignore cross traffic in tight spaces.
The ULT-MVP provides two relay outputs – one for indicating vehicle presence and a second for loop fault or pulse on entry/pulse on exit, or DETECT-ON-STOP.
Features
- Ignores cross traffic in tight spaces with DETECT-ON-STOP feature
- Fits into small operator housings, saving space
- Easy to install and setup with the ULTRAMETER sensitivity display
- Easy identification of interference problems using the crosstalk and RFI
- 10 sensitivity settings
- 4 operating frequencies
- Automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite or normal (5 min.) presence
- Small size: 73 x 38 x 78mm
- Socket mount -11 pin (JEDEC B11-88)
- CE compliant
Manufacturer's Warranty
- 2 Years
Technical Specifications
- Sensitivity: 10 levels, 0-9
- Ultra METER display: Indicates optimum sensitivity level, 0-9 diagnostic aid
- Loop frequency: 4 settings (low, med-low, med-hi, high)
- Loop inductance: 20…2000µH (Q factor > 5)
- Grounded loop: Isolation transformer allows operation with poor quality loops
- Automatic tuning: Detector tunes to loop on power-up and following frequency count function
- Environmental tracking: Automatic compensation
- Surge protection: Loop circuitry protected by surge suppressors
- Presence relay: SPDT relay contacts (form C)
- Output B relay: SPDT relay contacts (form C)
- Contact rating (resistive load): 2A @ 30VDC, 0.5A @ 125VAC
- Power / loop fault indicator: Green LED
- Detect / frequency count indicator: Red LED
- Detect-on-Stop: Requires vehicle to stop for a minimum of 1 second (1-2s typical)
- ASB (Automatic Sensitivity Boost): Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
- Power: 12…60 VDC (Max. 0.8 VA) 12…240 VAC (48…62Hz) (Max. 1.4 VA)
- Operating current: 20mA standby / 50mA detect
- Operating temperature: -40°C…82°C (-40°F…180°F) 0…95% relative humidity
- Dimensions (L x W x H): 73mm (2.9”) x 38mm (1.2”) x 78mm (3.1”)
- Weight: 0.25 lbs. (113 g)
- Housing: ABS plastic, IP30
- Connector: Socket mount – 11 pin male (JEDEC B11-88)
Vehicle Loop Detector Video
Product Literature
Find answers to our most frequently asked questions below. Got more questions? Reach out to our friendly customer service team, they will be more than happy to assist you.