This is the FAAC 390 Arm, which is a telescopic arm for the FAAC 390 swing gate operator. Part number 738706.

The FAAC Articulated beam kits are used in parking garages or other applications with low overhead clearances.The kit will handle a maximum 9 foot ceiling height. You must order an accompanying aluminum beam and FAAC will articulate the beam for you.

This is FAAC's flexible hydraulic hose. The standard available length is 33 ft, but we've made it easier for you to order additional length if needed.

This is the FAAC Model L Latching Plastic Enclosure. Door opens left or right. Has lockable hinged cover. 4.65" x 8.38" x 10.6".

This is FAAC model E plastic enclosure. Part Number 720119. 3.38" x 8.03" x 10.4"

This is FAAC 5 wire cable sold by the foot, part number 2194. For FAAC 390, 415 low voltage, 770 low voltage gate operators.

FAAC 3204435 Lobe Pump .75 lt. for FAAC FAAC 750 CBAC 760 CBAC.

FAAC 77514125 Electric Power Cord for the FAAC 750 and 760 CBAC.

FAAC 7099315 Flange Gasket for the FAAC 750 and 760 CBAC. Price includes 1 unit.

FAAC 7450115 Body (Pump Housing) for the FAAC 750 and 760 CBAC.

FAAC 7276025 Upper Flange for FAAC 760 CBAC gate operator.

This is FAAC Loop Detector DSP 11, Model 2665. This is a switchless vehicle detector with industry standard 11 pin base. Designed to handle parking, drive-thru and access control applications. Choose between 10-30 volts or 117 volts.

This is the FAAC 390 Arm, which is an articulated replacement arm for the FAAC 390 swing gate operator. Part number 738705.

This is the 115VAC (not low voltage) FAAC 415 Basic Single Kit, which includes the FAAC 115V 415 Swing Gate Operator, FAAC 455D Control Panel and enclosure. Choose between 10" x 12" enclosure or 14" x 16" enclosure. The FAAC 415 swing gate operator performs 25 cycles per hour, and is for gates up to 700 lbs per leaf and 15 feet per leaf.

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. These photocells may be wall mounted or post mounted. Add standard or double posts inside.

This is FAAC standard photocell system. Transmitter to receiver sensing provides reliable all-weather sensing. Range is 90 feet. Choose to add metal or plastic housing.

This is a standard mounting post for FAAC photobeam set 785163. Use this post if you do not intend to wall-mount your photo beams.

This is a double mounting post for FAAC photobeam set 785152. Use this post if you do not intend to wall-mount your photo beams. Includes mounting post (401035) and footprint (737630).

This is a FAAC plastic housing for FAAC photobeam set 785152.

This is a FAAC metal housing for FAAC photobeam set and T10 Key Switch 785152.

FAAC 7193205 Rack for FAAC 760 Swing Gate Opener.

FAAC 2581 Fiber Washer for FAAC 402, 422, 750 and 760 CBAC.

FAAC 7039305 Strain Relief Brass Washer for FAAC 402, 422, 750 and 760 CBAC.

FAAC 7109235 Strain Relief Nut for FAAC 402, 422, 750 and 760 CBAC gate opener.

FAAC 7161825 400 Operator Body for FAAC 400 Swing Gate Operator.